11-Button Mini RF Remote Controller for 5~24V Led Strips

This handy and very small LED controller can be used for any single-color LED strip or lamp and accepts supply voltages between 5 and 24V DC.
The maximum connection value is 12A.
Enough to control e.g. a 10m 5050 60L/pm strip) LED
However, you should take into account that the strength of the power supply is at least the connection value of the connected LED lighting.

Because the signal transmission from the remote control is transferred to the controller via radio frequencies (433.92Mhz) you can also mount the LED controller out of sight if desired.
The controller has a memory for the last used function and is therefore also suitable for being switched on and off with an external switch.

Place the dimmer/receiver module between the DC plugs of the LED strip and the power supply and the wireless RF dimmer is installed. NOTE: Version without DC plugs

Technical specifications:
Peak power: max 6A, 72Watt/12V, 144Watt/24V
Voltage: 5V-24V
10 Dimming positions
Memory for the last reading
3 quick buttons for brightness 25%, 50% or 100%
This controller can dim (10 steps) and has 8 pre-programmed positions
4 speeds are possible per position