Arcade Box Control Panel Sticker 'Pac-Man' Satin Gloss Laminated with UV Filter

Sticker specially designed for our arcade boxes that fits exactly and where the design takes into account the
position of joysticks and push buttons.
The artwork is printed on a high quality (200 micron) vinyl and provided with a matte UV resistant lamination.
The sticker is water resistant and can be cleaned with most cleaning agents.

Theme: Pac-Man
Vinyl thickness: 200micron
Lamination layer: matt with UV filter
Dimensions: according to the design of the CP arcade box with an overlap of 5 mm
Drawn push button holes are for illustrative purposes only and are not shown

Tips for applying the sticker quickly and professionally:
- Cut out the sticker all around
- Carefully cut out the joystick circles.
- peel off part of the sticker until just past the top row of buttons and cut off the paper layer.
- Now align the sticker on the joystick holes of the control panel and press the sticker on the top so that it can no longer slide.
- Now remove the rest of the paper layer and press the sticker firmly. Work from the inside out so that no air bubbles form.
- The sticker has a 5mm overlap which must be folded around the edge of the panel.
At the round corners, it should be trimmed/cut to fit nicely over the edge.
- Cut out the holes of the push buttons with a good sharp cutter or exacto knife.
- The edge can now be finished with T-molding

Delivery time: approximately 7-10 working days.