Daisy Chain Molex Cable for 5V Illuminated Push Buttons with 32x 6.3mm Connectors

If you want to save yourself a lot of time and aggravation, use this handy daisy chain (loop through) wiring set.
This handy cable set is suitable for daisy chaining up to 32 push buttons with 6.3 mm connection contacts and is equipped with a Molex connector.
If you do not have a Molex connection, but use an arcade power supply, you can of course also remove the Molex connector.
The red wire is +5V the black wire  is ground

Product specifications:
Easy connection of illuminated print heads
32x isolated ground connectors
32x insulated 5V connectors
Equipped with molex PC connector
Wire length between molex connector and first 6.3mm connection: 1.5m
Wire length between connectors: 17cm

Extra information:
For those who have not worked with LED push buttons before, LEDs have a cathode and anode connection and can only be connected in one way. If the LED does not light up, you must turn it over in the LED holder or exchange the connection contacts.