Daisy Chain Molex Cable Set for 12V Illuminated Push Buttons with 32x 6.3mm Connectors

If you want to save yourself a lot of time and annoyance, use this handy daisy chain (loop-through) wiring set.
This handy cable set is suitable for daisy-chaining up to 32 push buttons with 6.3mm connection contacts and is equipped with a Molex connector.
If you do not have a Molex connection, but are using an arcade power supply, you can of course also remove the Molex connector.
The red wire is + 12V and the black wire is ground

Product specifications:
Easy connection of illuminated print heads
32x isolated ground connectors
32x isolated 12V connectors
Equipped with molex PC connector
Wire length between molex connector and first 6.3mm connection: 1.5m
Wire length between connectors: 17cm

Extra information:
For those who have never worked with LED push buttons before, LEDs have a cathode and anode connection (popularly called + and -) and can only be connected in one way. If the LED does not light up, you must turn it over in the LED holder or swap the connection contacts.