DragonRise 1-Player PC/PS3/Raspberry Pi Zero Delay Arcade Interface Board, Hit Box Version

With this DragonRise 1-player game controller interface you can easily make your own Hit-Box for your PC, PS3, Raspberry Pi or other computer.
The DragonRise controller is equipped with a handy plug-in board so that you can quickly change, add or remove buttons without screws or soldering.
Difficult programming is also not necessary, because the controller is immediately recognized as a gamepad by almost every computer and is therefore
immediately ready for use.
12 push buttons with 2.8mm connection contacts are supplied as standard, but it is possible to connect up to 16 push buttons.
connect to this board. You will find any additional connection cables required at the bottom of this section.
Keep in mind that the functionality of the push buttons depends on the platform used.
If you still want to connect illuminated push buttons, there is a 5V connection on the board for this.
To make it easy for you, we have a special connection cable in our range with which you can connect up to 10 illuminated push buttons.
can connect. You can find this here

The DragonRise is a budget-friendly Zero-Delay controller that can also be used for many other applications, such as a button box, quiz controller, etc.

Due to the simple double wiring per push button, you no longer need a loop-through cable (daisy chain) for all ground contacts.
Because each connection cable has its own + and - connection, push buttons are very easy to add or remove.
Works without drivers on Windows, Raspberry Pi and Linux and is seen by the computer as a game controller.

Ideal for MAME, Virtual Pinball, Button Box etc.

Delivery includes:
1x 1-player DragonRise interface board
12x Connection cable for push buttons with 2.8mm cable lug connection
1x USB connection cable (1.8m)