Fruit machine Control panel DIY Kit for MFME

Are you also so fond of casino games and would like to play all those magnificent slot machines without putting mountains of money into them?
Then this is your lucky day, because for the famous MFME emulator we have created a wonderful kit that allows you 
slots realistically. 

However, you are not completely in the bargain, because before you can play, you still have to build something of course:)
We have kept the construction kit as simple as possible so you can play quickly, more than a few planks
glue a few boards together and screw in 10 screws. 
And if that still seems like too much work to you, don't worry, because we can optionally deliver everything completely assembled.  

All wood parts are CNC milled from 18mm thick black melamine MDF of professional quality. 
The hinged control panel with enough space to rest your hands on is already provided with 42 holes
where the rectangular push buttons fit perfectly and also do not rotate due to the anti-rotation lugs on the underside
of the push buttons.
The control panel is also provided with an infill for the supplied T-molding.
This not only gives a professional look, but also offers the necessary protection against impacts.
At the front of the base are also the necessary cutouts for 2 buttons, but if you prefer to have them
on top of the control panel then that is also possible in consultation. 

Important:
The kit contains only the console and the push buttons, but in order to use it with the MFME emulator
you still need to add a USB encoder or keyboard controller.
On a USB encoder, however, you cannot connect more than 12 pushbuttons, so if you want to connect all 14 buttons we recommend using an I-PAC 2 or minPAC keyboard encoder.
Included with the set is a daisy chain connection cable that allows you to connect all LEDs in parallel to a 5 or 12V power supply.
If you want to control the LEDs individually via the MFME emulator, this is also possible.
A separate Ultimarc PAC-drive module is available to which all 16 buttons can be connected and controlled via the software. With proper programming then only the buttons that are active will be illuminated (just like in real life:)

Basic package:
- Control panel with cutouts for 17 rectangular push buttons  
- Bottom plate 
- Front panel with cutouts for 2 rectangular push buttons 
- Back panel with 2x 22mm cutouts D-type USB 3.0 pass-through module  
- Side panel (2x)
- Piano hinge (nickel plated)1
- Lever clamp closure (2x)
- 16x rectangular (33x50mm) LED push buttons, white. (Other colors available on request)
- 16x microswitch with 4.8mm terminals
- Set of Dutch colored PVC inserts 
- 1.8m T-molding in color of your choice

Basic package:
- Control panel with cutouts for 17 rectangular push buttons  
- Bottom plate 
- Front panel with cutouts for 2 rectangular pushbuttons 
- Back panel with 2x 22mm cutouts D-type USB 3.0 pass-through module  
- Side panel (2x)
- Piano hinge (nickel plated)1
- Lever clamp closure (2x)
- 16x rectangular (33x50mm) LED push buttons, white. (Other colors available on request)
- 16x microswitch with 4.8mm terminals
- Set of Dutch colored PVC inserts 
- 1.8m T-molding in color of your choice

Dimensions assembled: 600x290x115mm (WxDxH) 

Plus package (optional):
- Ultimarc Pacdrive#1
- Ultimarc IPAC-2 
- 16x 1m connection cable with 4.8mm connector (for microswitches) 
- 16x 1m connection cable with 6.3mm connector (for controlling each individual LED)    
- Daisy chain ground harness with 4.8mm connectors
- Daisy chain ground harness with 6.3mm connectors
- USB 3.0 pass-through module (2x)

Tools required for assembly:
- PZ1 screwdriver
- Wood glue 
- Glue clamps (2x600mm + 2x 300mm) or duct tape 

Delivery time: approximately 4-5 working days