JAMMA+ Harness for 2 Joysticks with 4.8mm Connectors and 6 Buttons with 2.8mm Connectors

This JAMMA 6 button harness comes with different sized terminals. Each harness has 2.8mm crimped terminals for connecting buttons and 4.8mm crimped terminals for joysticks. This is ideal if you want to connect different sized micro switch terminals such as Sanwa / Seimitsu / Gold Leaf buttons and joysticks with 4.8mm micro switch terminals. This JAMMA harness is suitable for replacing worn wiring in existing JAMMA arcade machines or for new build arcade projects.

Product features:
- 6 button harness
- Mixed wiring for buttons and joysticks (SPECIAL version)
- 2.8mm jacks for connecting buttons with built-in microswitch (Sanwa / Seimitsu / Gold Leaf buds)
- 4.8 mm jacks for connecting joysticks
- Connection contacts with silicone protection
- Ideal for projects that use 2.8mm for buttons and 4.8mm for joysticks
- Length: 1,4m 
 

Function	Wire Color	Pin	Wire Color	Function
SOLDER SIDE				COMPONENT SIDE
Ground	Black	1	Black	Ground
Ground	Black	2	Black	Ground
+5 VDC	Red	3	Red	+5 VDC
+5 VDC	Red	4	Red	+5 VDC
–5 VDC	Green	5	Green	–5 VDC
+12 VDC	Yellow	6	Yellow	+12 VDC
Key Slot		7		Key Slot
Coin Counter 2	Orange	8	Orange	Coin Counter 1
		9
Speaker	White	10	White	Speaker
P2 – Button 6 (19in1 Only)	Black	11	Black	P1 – Button 6 (19in1 Only)
Video – Green	Green	12	Red	Video – Red
Video – Vertical Sync	White	13	Blue	Video – Blue
Service Switch	Red	14	Black	Video – Ground
		15	Orange	Test Switch
Coin 2	Green	16	Green	Coin 1
P2 – Start	Brown	17	Brown	P1 – Start
P2 – Up	Red	18	Red	P1 – Up
P2 – Down	Orange	19	Orange	P1 – Down
P2 – Left	Yellow	20	Yellow	P1 – Left
P2 – Right	Green	21	Green	P1 – Right
P2 – Button 1	Blue	22	Blue	P1 – Button 1
P2 – Button 2	Violet	23	Violet	P1 – Button 2
P2 – Button 3	Grey	24	Grey	P1 – Button 3
P2 – Button 4	White	25	White	P1 – Button 4
P2 – Button 5	Pink	26	Pink	P1 – Button 5
P2 – Button 6	Black	27	Black	P1 – Button 6
Ground	Black	28	Black	Ground