MiSTer FPGA IO Board with Fan Cooling for Terasic DE10-Nano

The MiSTer FPGA IO Board v6.1 includes the following useful features: a VGA (DB15) connector that allows the output of a VGA/RGB/YPbPr signal depending on the cable used, a 3.5mm audio jack connection with Mini-TOSLINK for analog audio output and digital audio output, a secondary microSD card slot functionality depends on the core used, a fan speed control that provides a 3.3 volt / 5 volt selector jumper, a status LED control jumper that enables or disables the built-in LEDs, a Sync-on-Green switch, three status LEDs (red, yellow, green), three large push buttons for system reset, on-screen menu and game reset, an expansion connector in the form of a USB 3.0 connector, but this is not for standard USB devices.

The MiSTer I/O board v6.1 adds an additional GPIO pin to the user IO port and provides support for the Sega Mega Drive / Genesis / Master System gamepads using a SNAC board.

Once assembled, each MiSTer FPGA IO board is inspected under a microscope to ensure no solder bridges are present, the completed version 6.1 IO board is fully cleaned in an ultrasonic bath to remove any flux residue left over from assembly . Once clean, the IO board is fully tested on a live MiSTer setup. Each IO board uses premium brand components including Samsung Electro-Mechanics and Bourns Inc.

Configuration of the video output signal on the IO board is controlled through the MiSTer.ini file, more information about how to configure and download the MiSTer.ini file see the MiSTer.ini configuration page.

For more information on analog video output compatibility, see the MiSTer wiki.

SW3 on the DE10-Nano board must be in the ON position for the digital IO board to function.

Specifications:
- Suitable for Terasic DE10-Nano FPGA board
- Includes silent fan or Noctua NF-A4x10 fan
- VGA Connector (VGA / YPbPr / RGB) Video Output
- 3.5mm audio jack with mini TOSLINK
- 3 user buttons & 3 status LEDs
- Secondary MicroSD slot
- Expansion Connector User IO
- Switchable Sync-On-Green (SOG)
- Headers for external push buttons & LEDs
- Fully assembled and tested