RP2040-PICO Interface Board With RGB For PS3, PS4, Raspberry Pi, Android and PC

This is obviously very practical, one controller for many gaming systems. 
Whether you want to build a controller for a PS3, PS4, Nintendo Switch, Raspberry Pi or PC, the RP2040-PICO makes it
all possible.       
The controller features convenient 2-pin Dupont connectors for connecting all push buttons and joysticks with separate microswitches. For joysticks with a 5-pin connection, there is a separate 5-pin JST-XH connector on which you 3
it can easily connect.

The RP2040-PICO with Raspberry ARM microcontroller works super fast and without delay.

Also, the RP2040-PICO features a 5V RGB connector to which RGB led push buttons or led strips can be connected.
By holding the Start and Select pushbutton simultaneously and then pressing 1P or 1K you can easily choose the desired lighting effect and you can also adjust the brightness by pressing 2P. 
 

Specification sheet:

Compatible with PS4/PS3/Switch/PC computers/Android phones, PS4 program key added, bootless, with S0CD overlay mode.

Key Introduction:
1) HOME key * 1: Turn on the controller or execute commands from the host,
2) Direction keys * 1 group: up, down, left, and right.
3) Function control keys * 4: A, B, Y, X.
4) 4 function keys: R1/L1/R2/L2/SELECT/START/L3/R3
6) 1 combo key: TUBRO key (combo), press TUBRO once and then CLEAR (Clear)

Firmware flashing method:
1. Press and hold the B00T key without inserting the USB data cable to the computer, and a USB flash drive will appear on the computer,
2. Just move/copy the latest firmware file to the USB drive and the flash drive is successful.

Mode switching:
Press and hold the A key to plug in: Switch: suitable for Nintendo Switch
Press and hold the B key to plug in: Pc/xinput suitable for PC/PC360
Press and hold the X key to plug in: X-PS3/Dinput is suitable for PS3/PC hosts
Press and hold the Y key to plug in: Y-PS4: applicable to PS4 host
Press and hold RT-HID KB to plug in: HID computer keyboard mode
Download the latest firmware website: https://gp2040-ce.info/downloads

A-PAD mode
SELECT+START+DOWN - Normal D-Pad mode
SELECT+START+Left - Left analog joystick mode
SELECT+START+LIGHT - Right analog joystick mode

SOCD mode
Switching the SOCD mode allows for special operations such as thick coverage. Press the following buttons when turning on the device:
HOME+START+DOWN - Return to center (UD=N, L+R=N)
HOME+START+UP - Priority in direction (U+D-U. L+R=N)
HOME+START+Left - Last input priority

TURBO function:
TURBO function setting: First press and hold the function key to be accelerated, such as A key, and then press and hold the TURBO key. At this time, A key has the function of accelerating continuous typing;
Turbo function cancellation: First press and hold the function key that has already been set for acceleration, such as the A key, and then press and hold the Turbo key. At this point, the acceleration combo function of the A key is cancelled.

RGB lighting effect switching: Press and hold select+start, then enter the following combination keys
Previous set of lighting effects: 1P
Next set of lighting effects: 1K
Increase brightness: 2P
Reduce brightness: 2K
Previous light effect: 3P
Next lighting effect: 3K
Previous key press effect: 4P
Next key press effect: 4K
Overlay mode: Up overlay: FN+HOME+Up
Rear coverage: FN+HOME+left
Medium coverage: FN+HOME+Down
Rocker mode: Cross key: FN+Select+Down
Left joystick: FN+select+left
Right joystick: FN+select+right

Delivery includes:
1x 1-player RP2040-PICO multi system USB interface board
1x USB-A to USB-B connection cable