Sanwa JLF-P-B - 0.65mm Oversized Nylon Actuator Blue For Sanwa JLF Series Joysticks

The Sanwa JLF-P-B oversized 0.65mm actuator is made of wear-resistant nylon and is intended to be used as a replacement actuator on Sanwa JLF series joysticks. Once mounted, you will benefit from a shorter throw and faster operation of your joystick, which will result in improved gameplay. The Sanwa 0.65mm oversized actuator is ideal for fightstick builders and modders who
like better performance. Tested with square and octagonal restrictor plates, the Sanwa JLF-P-B oversized actuator consistently engages the standard switches on Sanwa JLF series joysticks. 

Compatibility:
The Sanwa JLF-P-B oversized actuator is compatible with all Sanwa JLF series joysticks.

Installation:
Installing the Sanwa JLF-P-B actuator is very simple.
1- Take your JLF series joystick and use a small flathead screwdriver to carefully loosen the C-clip on the bottom of the joystick
2- Lift the standard actuator and be careful not to lose the spring that is inside the actuator. 
3- Insert the spring into the Sanwa JLF-P-B actuator and gently push it down.
3- Hold down the actuator and using a pair of pointed pliers, carefully replace the C-clip.