Seimitsu PS-14-DN-C Red 24mm Arcade Push Button

The Seimitsu PS-14-DN-C is almost technically identical to the PS-14-DN-K but has some
different external features.
The outer rim and plunger in this version are made of an opaque plastic and provided with
and crystal clear plastic lens hood, under which self-made artwork can be placed. .

With an outer diameter of 28.4 mm and 24 mm bore size, the PS-14-DN-C is particularly suitable for extra functions on fight sticks and arcade boxes, but can
can of course be used for everything if a somewhat smaller button is desired.
In terms of performance, they are not inferior to the bigger brothers, because these buttons are also equipped with the same high-quality Seimitsu microswitches with the famous fine operation.

Like the equally popular Sanwa OBSF and OBSC series of pushbuttons, Seimitsu pushbuttons are widely used in Hi-End Fight-Sticks and arcade cabinets where gaming is “serious business”.
A push button that you must have played with, then you immediately understand that this push button did not become famous overnight.
Tangible quality and finesse that you will soon no longer want to live without.

The Seimitsu PS-14-KN-C has an installation diameter of 24mm and is ideally suited for mounting in Plexiglas and metal control panels with a thickness of 2-10mm. If you want to use these push buttons in a thicker wooden control panel, you will have to cut these deep down at the bottom or build them up from 2 layers.

The Seimitsu PS-14-DN-C screw-in pushbuttons have 2.8mm terminals and must therefore be connected
with 2.8mm cable lugs.
Connecting wires, daisy-chain ground, cable shoes or JAMMA wiring harness with 2.8mm cable shoes are available separately

Delivery includes:
1x Seimitsu PS-14-DN-C red
1x mounting nut