Timer Board Built-in Module with Led Display for Electronic CPU Coin Checker

This digital time-controlled module can be used in many ways and ensures that a device
can be activated for a specific time, which can be set by yourself, by means of a CPU coin system or other
pulse generating contact.
The module can be set to minutes / seconds or hours / minutes (9:59 max) as desired and is suitable
for devices with a maximum connection value of 1250W 250V / AC or 500W 28V / DC.
This timer board is also equipped with an accumulation function.
When the coin system and the unit are set to, for example, € 1.00 for 15 minutes, the insert will be
from € 3.00 the up-time can be set to 45min.

It is also possible to connect a pause button so that the time setting can be stopped.
This pause function can be performed at a great distance from the motherboard and thus be controlled remotely.
It is also possible with a separately available switch unit with RF remote control to activate and deactivate this function wirelessly.

Because the 3-digit LED display is connected to the control unit with a ribbon cable, it is
simpler and easier to integrate into a housing.

The time module will beep 30 seconds before the time expires before power is turned off.
Should the power fail or be turned off during use, the remaining time will be retained
when the power comes back on.

This module is ideal for controlling gaming machines, TVs, PCs, massage chairs, chargers, etc.

Delivery includes:
1x Timer board main unit
1x Led display
1x Ribbon cable for LED display (40cm)
1x Connection cable for 12V (CPU) coin system with pulse signal (40cm)
1x Connection cable for pause function (10cm)