Ultra Wide Body Extended (U-WBE) Super Custom 2-Player Arcade Bartop Construction Kit

With our new Ultra Wide Body Extended bartop, we meet the needs of our customers who are looking for
a bartop with even more features.
With a width of 65cm between the side panels, it is now also possible to fit up to 27" large 16/9 screens.
Also, the control panel has been widened 6cm and lowered at the front for an even better playing experience. 
The redesigned control panel also offers the option of placing a trackball or spinner. 
With the trackball option you should take into account that there is no more room for buttons in the middle of the front of the control panel.
the control panel. If you select the 6 hole front panel option, we will mill 4 holes on the left and 2 holes on the right.  

This stunning U-WBE bartop set is also used for our 'Ready to Play' premium bartops and is characterized
by an extremely well thought-out design where there is even more room for your own input.
We do not supply our bartop sets with clumsy plastic mounting blocks or screws right through the side panels. 
This guarantees a solid construction and you do not have to worry that your artwork will be lost
lost when you want to remove a part to make an adjustment.  
Searching for a better, more thoughtful and beautiful bartop construction set will therefore be quite a challenge.

What can you expect from our U-WBE bartop building set?
- CNC-milled construction parts from 18,35mm black melamine-coated MDF of professional quality.
- T-molding milling with 1.6mm slot width for a perfect fit of our T-molding
- Large control panel (650x211mm) with milled front and pre-glued front panel.
- Plexiglass marquee (660x100x3mm)
- Monitor cover made of 3mm thick Plexiglas
- Speaker panel suitable for 2.5" and 3.3" speakers (various cutout options available)
- Spacious 2-player setup with no less than 36cm of space between the joysticks.
- Side panels are fitted with 1.6mm T-molding milling all around as standard.
- End edges of wooden parts above and below the marquee finished with FastCap edge band
- Mounting from the inside by means of steel brackets so that there is no finishing (filling screw holes, etc.) more
required after assembly (save time and aggravation when painting or pasting with vinyl artwork)
- Tailgate with cylinder lock and cooling slots for passive cooling
- Bottom valve with cylinder lock below the control panel (for easy access to control components during assembly and maintenance)
- Special milling for the Plexiglas minitor cover, so that it fits seamlessly and no unsightly finishing profiles are required.
Due to the special construction, it is also possible to place the monitor cover only when the entire cabinet has been built.
- Many options for holes and cutouts.
- After assembly, most parts can be removed individually without having to break everything down.
Very handy if you have already finished the cabinet and want to make another adjustment.

Additional options:
A number of more options are available on request, such as: 8 push buttons per player or a special
milling for a trackball.
Because these options can influence the choice of certain parts and/or their position, we must first
know what type of push button you want to use. Also keep in mind that not every design is suitable for certain
adjustments and that this may interfere with the appearance.

Delivery includes: 
  2x Side panel with T-molding slot all around
  1x Marquee top panel with pre-glued corner and cutout for plexiglass
  1x Marquee bottom panel with slot for plexiglass
  1x Control panel with holes according to chosen option 
  1x Front panel with holes according to chosen option 
  1x Bottom plate
  1x Bottom flap + 18mm lock bore
  1x Rear panel with holes according to chosen option  
  1x Rear panel with cutouts according to chosen option
  1x Monitor mounting plate with VESA 100 mounting holes
  2x Piano hinge (nickel plated)
20x Steel mounting brackets
  2x Lock plate/attachment plate 
80x screw 3.5x16mm (TX15)
  4x Screw 3,5x40mm (TX20)
  4x Ball head screw 4x16 (TX
40x Screw 2.5x15mm (PZ1) 
  2x Cylinder lock 25x18mm 
  4x 40mm disk feet with chrome rim and EVA foam anti-slip coating 
  1x Plexiglas monitor cover (660x385x3mm) optional  
  1x Plexiglas marquee panel (660x100x3mm) optional
  1x Clear manual with sample photos (digital)

Dimensions mounted box: 687 x 481 x 635mm (Width x Depth x Height)
For available interior space, see the installation drawing with the photos

Tools needed:
- Screwdriver
- Torx T15 screwdriver bit
- Torx T20 screwdriver bit
- PZ1 screwdriver bit
- tape measure/ruler
- square (not strictly necessary)

Tips:
- For mounting this kit it is useful to use 50-100mm long screw bits or bit extension.
- Adjust (if present) the slip clutch on the screw driver so that the screws do not run wild.
- A machine with the smallest possible drill head gives me

Delivery time: approximately 5-7 working days